Kenshine Pump Valve MFG Co.,LTD

Free Member

Kenshine Pump Valve MFG Co.,LTD was founded in 1995, main in producing and supplying products like pump, industrial pump, centrifugal pump and so on, our products are selled to Asia, Middle East, Africa and other markets.

home » Supplier's HomePage » rotor pump » Product details

QY Self-priming gas-liquid vortex pump

QY Self-priming gas-liquid vortex pump
  • Model Number: 40QY-6
  • Brand Name: kenshine-pump
  • Place of Origin: Shanghai, China
  • Minimum Order Quantity: 1set
  • Supply Capacity: 600sets per month/month
  • Payment: T/T in advance
  • MemberShip: Free Member
  • Inquiry Now
  • Bookmark & Share:

40QY-6 QY Self-priming gas-liquid vortex pump Description

Self-priming gas-liquid mixing pump

The suction inlet of the gas-liquid mixture pump can use the negative pressure action to inhale the gas, without the use of air compressor and atmospheric ejector.

The high speed rotating impeller of the pump mixes the liquid and the gas, without stirrer and mixer.

Due to the pressurized mixing in the pump, the gas and liquid are fully dissolved, and the dissolution efficiency can reach 80-100%.

Highly soluble solutions can be produced without large pressurized dissolved gas tanks or expensive reaction towers.

The gas-liquid ratio is about 1: 9 (inspiratory capacity is 8-10%), and the inspiratory capacity can be increased by using in series

A gas-liquid mixing pump can inhale, mix, dissolve and directly deliver the highly dissolved liquid to the point of use.

The use of gas-liquid mixing pump can improve the efficiency of dissolved gas-liquid production, simplify the production device, save the site, save the operation cost and maintenance cost


The pump is mainly used for gas-liquid mixing and stirring, liquid transport, circulation and pressurization, ozone water preparation, oxygen-rich water preparation, as well as water, pure water, food spray treatment.

Thin, clean, low viscosity or liquid containing fine impurities Liquid temperature: -15 to 120 degree Celsius

gas-liquid ratio is about 1: 9 (inspiratory capacity is 8-10%)

Self-priming height is about 9m (NPSH)

The suction inlet is horizontal and the exhaust outlet is vertical

flow rate 1-12m3/h
head 40-50m
pump material Stainless steel
vortex pump pressurization pump
circulation pump gas-liquid mixing vortex pump
feed water pump self-priming pump
ozone water preparation pump oxygen-rich water preparation pump
kenshine-pump china pump